Wednesday, November 8, 2017

Using Hardware Store Escutcheon Pins as Rivets!

By on Wednesday, November 08, 2017 3 Comments

I don't know about you but having to order rivets specially for jewelry making can be a pain.  But I loved the idea from Tracy Stanley, the designer and author of the wire and metal book I reviewed not too long ago.  She showed in this tutorial how easy it is to use just regular hardware store escutcheon pins as nail rivets.


Once most of the nail shaft is cut off, then patient tapping with the riveting hammer is the key to setting it.

Just learning how to rivet will increase your creative options. Wire and riveting are the two most useful cold connection techniques.

Her book, Exploring Metal Jewelry is chockful of tips and tricks and above all, awesome inspirations once you master those skills. No need for torch work!


Disclosure
I receive books and products for review. I also receive a small fee for any products purchased through affiliate links. This goes towards the support of this blog and to provide resource information to readers. The opinions expressed are solely my own. They would be the same whether or not I receive any compensation.

Share

3 comments:

  1. Looks like fun, I will have to try that!

    I also really like the TierraCast 2-part compression rivets. They were designed for use with leather but they work with metal.

    ReplyDelete
  2. I have been using brass nail heads as rivets for a few years now and they offer so many new and exciting use possibilities. Some take a bit more work to flare out the shank, but they are so worth it. And the best part, because they come from the hardware store, they are much cheaper than some riveting jewelry components!

    ReplyDelete
  3. I think this is a great idea and so much cheaper!

    Thanks for sharing this Pearl!

    ReplyDelete

 

TUTORIALS

PEARL'S DESIGNS

DESIGN MAKEOVER

TIPS AND TRICKS

SUPPLIES

TOOLS